Al Ansari Calibration Lab is accredited to the ISO / IEC 17025: 2005, General requirements for the competence of testing and calibration laboratories, by the International Accreditation Servcie (IAS) since 2012 for the calibration disciplines listed below.
Accredited since 2012, we Al Ansari have grown to become one of the most highly regarded calibration laboratories in the Sulatanate of Oman.
Accredited Calibration services now offered include the instruments in the field of Electrcial, Force, Torque, Temperature, Dimensional and Weighing.
A wide scope, both in the laboratory and ‘on-site’, provides our clients with a ‘total package’.
We work extensively alongside some of the most respected companies in Oman and across a wide range of industries including the – Construction, Manufacturing, Engineering, Pharmaceutical and Food industries to name but a few.
Our Master calibration equipment is International traceable and our measurement Uncertainty capability is of the highest order.
The following are our accredited measuremnt area and range.
Measurement Area |
Range |
DC Voltage – Source |
0 to 1000 V |
DC Voltage – Measure |
0 to 1000 V |
AC Voltage (up to 20 KHz) – Source |
33 mV to 1000 V |
AC Voltage (up to 20 KHz) – Measure |
100 mV to 1000 V |
DC Current – Source |
0 to 11 A |
DC Current – Measure |
0 to 10 A |
AC Current – Source |
30 µA to 10 A |
AC Current – Measure |
10 mA to 10 A |
Resistance – Source |
50 µΩ to 90 GΩ |
Resistance – Measure |
1 Ω to 100 MΩ |
Capacitance – Source |
10 nF to 1 mF |
Capacitance – Measure |
10 nF to 1 mF |
Thermocouples – Simulation (Type J, K, T) |
-200 °C to 1372 °C |
Thermocouples |
-40 °C to 1200 °C |
Dial Thermometers |
-40 °C to 650 °C |
|
Measurement Area |
Range |
Infrared Thermometers |
500 °C to 1200 °C |
Furnance, Oven |
-40 °C to 1600 °C |
Incubators, Fridges, Freezer |
-40 °C to 150 °C |
Water Bath |
40 °C to 650 °C |
Rotational speed |
0 to 12 500 rpm |
Balances & Scales |
0 to 2 T |
Pressure Gauges |
0 to 2000 Bar |
Pressure Recorders |
0 to 2000 Bar |
Force – Tension |
0 to 100 KN |
Force – Compression |
0 to 3000 KN |
Torque Wrenches |
0 t0 1500 Nm |
Dial Gauges |
0 to 50 mm |
Micrometers |
0 to 25 mm |
Calipers |
0 to 800 mm |
Length Standards |
0 to 1500 mm |
|